Equus Wave Sex Bench Setup and First Use Guide
By Sex Furniture, Positioning Pillows & Intimacy | Published: 2026-10-23
Category: How-to Guides
Learn how to set up and use the Equus Wave sex bench for confident, comfortable positioning. Step-by-step instructions and tips for first-time users.
Quick answer
Set up your Equus Wave by arranging the two sculpted pieces on a firm, level surface, then adjust their spacing and angle to match your preferred position. The modular design lets you fine-tune height and access for confident, powerful movement.
Why the modular design matters for positioning
The Equus Wave consists of two separate pieces that can be used together or apart. This allows you to create different angles and heights depending on the activity. For example, placing the pieces close together supports a more upright position, while spacing them out lowers the profile and increases access.
A common mistake is assuming the bench must stay assembled as a single unit. Experimenting with the gap between pieces can dramatically change comfort and leverage, especially during partner play.
Choosing the right surface and location
The Equus Wave works best on a non-slip floor such as carpet, a yoga mat, or a rug. Hardwood or tile can cause the pieces to slide during vigorous use. If you plan to use the bench on a bed, place a grippy pad underneath to keep it stable.
Because the bench is narrow and easy to straddle, it fits well in most rooms without dominating the space. The new velvet finish and decor colors help it blend into your bedroom or living area when not in use.
Step-by-step setup and first use
- Unbox and inspect: Remove the Equus Wave pieces from the packaging. Check that both sculpted sections and the slip cover are present. Place them on a clean, flat surface. Inspect the velvet fabric for any snags or loose threads before first use.
- Position the two pieces: Decide whether you want the pieces close together (for a higher, more upright support) or spaced apart (for a lower profile and easier access). Align them parallel or at a slight angle depending on the position you plan to try. Start with a 6-inch gap between pieces and adjust from there. Too wide a gap can reduce stability.
- Test stability and height: Kneel or sit on the bench to check that it feels secure and supports your weight evenly. If the pieces shift, move them closer together or add a non-slip mat underneath. If you feel any wobble, the surface may be uneven. Reposition on a firmer floor.
- Adjust for your partner or solo use: For partner play, position the bench so the receiving partner can lean back or forward comfortably. For solo use, straddle the bench and experiment with the angle of each piece to find the most supportive posture. The narrow profile makes it easy to straddle, but ensure your knees and shins are fully supported to avoid discomfort.
- Add the slip cover (optional): If you ordered the Equus Wave with Cover, fit the slip cover over each piece. The cover is designed to transform the look and can be removed for washing. Smooth out any wrinkles before use. Wash the slip cover on a gentle cycle before first use to soften the fabric and remove any manufacturing residue.
Product facts
- Equus Wave with Cover: The Equus Wave is a modular positioning system with two sculpted pieces that can be used together or apart to fine-tune height, angle, and access. This means you can customize the setup for different body types and activities without buying additional accessories.
Equus Wave with Cover - Equus Wave with Cover: It is finished in elevated lush velvet fabric and available in expanded decor colors, with a new slip cover that transforms the look. The slip cover makes cleaning and style changes easy, so the bench stays fresh and matches your room decor.